JX-CS hood door seals are suitable for places where high safety sealing requirements are required between building door openings and vehicles, and the compartments of various models need to be sealed. Especially for warehouses that have strict insulation requirements and do not allow mosquitoes, flies, dust, and rainwater to enter.

It consists of front sealing curtains (one top curtain and two side curtains) and surrounding sealing curtains. The front sealing slats consist of three 3mm thick double-layer high-density black polyester fibres with yellow reversing strips. The surrounding sealing curtains are composed of 1 mm thick high-density polyester fibers. When the truck is parked into the hood door seal, the three front sealing curtains form a flap-like seal with the outside of the truck bed.

The whole frame is composed of galvanized steel pipe and aluminum alloy, with spring balance, and the whole design is a crash-resistant design.

It can be installed on steel structures with lined skeleton and concrete walls, but not hollow bricks. The installation method is relatively simple, and can be fixed on a solid wall with self-tapping screws, expansion bolts, etc.

During the berthing process, the hood door seal seals the cabin with its flexible front sealing lamellae. The truck driver first opens the compartment door at the rear of the compartment by 270 degrees, fixes it with a hook, and then reverses according to the symmetrical position of the yellow reversing bar, and the rear of the compartment gently touches the platform.